Gate Operator Depot
Your cart is empty.


The PRO-SW2000XLS will operate a gate up to 16 ft. long or weighing 500lbs. Works on all types of gates;* chain link, tube, panel, ornamental, wood and vinyl, no welding required.

•Solar Compatible


 Easy transmitter programming with the touch of a button.
 Includes battery backup, receiver antenna, entry transmitter,
AC transformer and all necessary mounting hardware for a post
mounted installation,  (25.4 cm) total offset.

• 12 Volt DC / 7.0 amp hour, sealed, rechargeable battery (included).
Battery charge is maintained by a 120V AC/60 Hz input and 14V
AC, 28 VA, transformer.
• Powered by a reliable 12 Volt DC motor.
• Charging regulated circuit on control board. “Sleep draw” is 15
mA; “active draw” is 2 to 5 amps.

• The GTO/PRO® control board can be programmed for pull-toopen
or push-to-open.
• Operating temp -5 F (-21C) to +160 F (71 C).
• Opening time: From 15 to 20 seconds.
• Range of arm stroke: is up to 13˝ (33 cm).
• Operator length: with arm fully retracted is 33.75˝ (85.2 cm),
mounting point to mounting point.
• Operation, diagnostic and safety alarms,
• Inherent obstruction sensing.
• Soft start/soft stop—for long mechanical life expectancy.
• Auto close adjustable 3–120 seconds delay.

2 Year (RESIDENTIAL application)
Class I

System Certified with UL325 5th Edition safety
standards, ETL listed.

Solar Power: For dual gates, we recommend a
minimum of 10 watts. (FM123)

Push to Open applications: require one Pushto-
Open bracket (347IH) per operator.

• Automatic Gate Lock (FM144/FM142)
• Residential Intercom/Keypad (F3100MBC)
• Solar Panel (FM123)

Installation Instructions

$677.03 For an even lower price, add to cart.

  • Model: PROSW2000XLS Gate Opener
  • Manufactured by: GTO

Copyright © 2019 Gate Operator Depot.