Linear 109950 Multi-Code Receiver

Linear 109950 Multi-Code Receiver
larger image

The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.

 

The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.

The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.

The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.

The Model 109950 is compatible with Multi-Code and Stanley transmitters only.

Features

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1,024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
  • Dimensions: 3.625" W x 5.25" H x 1.5" D

 

 

  • Model: 109950
  • Shipping Weight: 2lbs
  • 998 Units in Stock
  • Manufactured by: Linear

$37.63

Add to Cart:

This product was added to our catalog on Tuesday 10 July, 2012.


Support

We are a wholesale access control product sales company and recommend you have a professional electrician or gate operator installation company install your products. In regards to our telephone entry products you should have an experienced Security or Telephone Company install your products. Our products are technical products and require experience trades people to properly install your equipment so you may have your warranty for the products you purchase from us. You can look up installation companies on our vendors websites or online in your local area. These are not DIY do-it- yourself systems. You need someone to properly install your system.

Call us toll free at 866-790-3667 to get recommendations on your specific application. We can help you properly size and select the equipment our manufacturers make to their specification so you have a good installation based on your specific requirements.


Contact


West Tennessee Ornamental Door

Address
1800 Transport Ave
Memphis TN 38116, USA

Telephone
+1-866-790-3667
+1-901-346-0662



2008-2019 Gate Operator Depot by West Tennessee Ornamental Door
Notice: Unauthorized attempts to access, upload information, or deface this web site is strictly prohibited and are subject to prosecution under the Computer Fraud and Abuse Act of 1986 and Title 18 U.S.C. Sec. 1001 and 1030.